Shower enclosures
Glass shower enclosures, engineered for your corner.
Corner showers, neo-angles, knee walls and full-height steam rooms. Enclosures are where custom glass earns its keep: multiple panels, odd angles and nothing off the shelf will fit.

When you need an enclosure, not a door
A door closes an alcove. An enclosure is the shower wall on one or more sides: a corner shower with a return panel, a three-sided neo-angle, glass set on top of a tiled knee wall, or a floor-to-ceiling steam shower with a transom. Each of those has angles, notches and support needs that have to be worked out on site, which is why we measure and design every enclosure in person.
We cut notches around tile niches and benches, clip panels to knee walls, specify support bars or headers where the glass needs them, and plan the door swing around your vanity, toilet and towel bars.
At a glance
Shapes we build
Enclosure types
90° corner
Door plus a return panel meeting at a right angle. Works for most corner showers.
Neo-angle
Three panels on a 135° base for corner showers that need to save floor space.
Knee-wall enclosure
Glass set on a tiled half wall for privacy and storage niches.
Steam shower
Full-height glass and a transom keep the steam where it belongs.
Walk-in screen
A fixed panel for curbless and walk-in showers, no door to swing.
Tub-to-shower conversion
Replacing a tub? We glass in the new shower once tile is set.
From our gallery
Recent work
Steam shower enclosures
A steam shower needs glass that runs to the ceiling (or a transom panel above the door) so vapor stays in. We fabricate full-height panels, fixed or operable transoms, and doors with continuous seals along every edge. We’ll coordinate with your contractor on ceiling slope and the steam generator location before we measure.
Knee walls, benches and curbless showers
Half walls are a great way to add privacy and a place for niches; we set glass on top with clamps or a low-profile channel. Built-in benches need notched glass. Curbless walk-in showers get fixed panels sized to the splash zone and a linear drain plan. Bring us in early and we’ll advise on every one.
How it works
Four steps. One family business.
Call or send photos
Tell us what you’re planning. Text a few photos if it helps; Michael can often ballpark a price on the phone.
The owner measures
We come to you, measure every wall for plumb and square, and show real glass, hardware and finish samples.
Cut to fit
Your glass is cut, edged and tempered to your exact openings. Most custom showers are ready in about 2–3 weeks.
Installed by our crew
Our own installers set, level and seal everything, then walk you through care. We stay reachable for years after.
Can you build glass around a tile bench or niche?
Yes. We notch glass around benches, niches, knee walls and even sloped ceilings. That’s a big part of why we measure in person.
Do steam showers need special glass?
The glass is the same tempered glass, but it has to run full height or include a transom so steam can’t escape, and every edge needs a seal.
Do corner enclosures need a support bar?
Sometimes. A return panel that isn’t clamped to a wall along a full edge may need a slim support bar or header for stiffness; we tell you at the measure and match it to your hardware finish.

Free in-home estimate
Let’s measure your space. It’s free.
Every piece of glass we install is cut to your exact openings, so it starts with a visit. Michael brings samples of glass, hardware and finishes, answers every question and leaves a written price.
- Measured by the owner, not a commissioned salesperson
- Fabricated to the sixteenth of an inch, installed by our own crew, never subcontracted
- Tempered safety glass and solid-brass or stainless hardware
- Written estimate, no obligation, no “today-only” pricing


